Oil Water Separator

Product Details:

TPI (Tilted plate interceptor) separators are used predominantly to separate free oil from effluent. TPI unit is deployed at the primary stage of wastewater treatment wherein plate packs are used as the main separation device. The plate packs are designed with specific spacing and alignment to enable solids to settle and fall to the bottom while allowing oil drops to rise and coalesce. A TPI is also equipped with a secondary coalescer screen. This oleophilic coalescer traps oil particles down to 20 microns. Small particles coalesce into large globules and rise to the surface. Oil is skimmed using a suitable skimmer. Sludge at the bottom is removed by either gravity force or by a sludge removal pump.

 Specifications

1. Flow rate : 5 m3/hr to 600 m3/hr
2. MOC of TPI Tank : RCC/ MSEP/ MSFRP/ SS304/ SS316
3. Tilted Plate Pack : Oleophilic
4. Secondary Coalescer : Oleophilic
5. Oil content at outlet : <10 ppm
6. Oily water feed pump : Low shear pump
7. Sludge removal pump : Screw pump

 Features

1. Customized design
2. Automated system
3. Easy to install
4. Safe operation in hazardous areas
5. Low maintenance
6. Value for money
7. Easy availability of spares

 Application Areas

1. Oily Water Treatment
2. Oil & Grease Removal
3. Coolant Recovery Systems
4. Pre-treatment Solutions

Disclaimer: Product prices are subject to change based on the specifications provided in the inquiry.

Product Details:

Hydrocyclone oil water separator is a skid-mounted packaged solution. It is a simple and most powerful oil water separator that does not use consumables or chemicals. In this separator oily water is pumped tangentially into the separator using a high-pressure low shear pump, it forms a powerful vortex and a huge centrifugal force. The centrifugal force is 1000 times stronger than the force of gravity pushing the light oil droplets towards the centre of the vortex. Thus, two streams are generated, treated water ready for discharge or reuse, and separated oil for storage and disposal.

 Specifications

1. Capacity : As per requirement
2. Weir Skimmer : Floating funnel type
3. Basket Strainer Filtration Rating : 3 mm
4. Feed Pump : Low shear pump
5. Pump Drive : Electric/ Pneumatic
6. Hydrocyclone MOC : SS304/ SS316
7. Set pressure of pressure relief valve : 110 % of operating pressure
8. Decant Tank MOC : MSEP/ MSFRP/ SS304/ SS316
9. Hose Braided hose MOC: SS316/ SS304
10. Valves : Control valves
11. Control Panel : Flameproof/ Non-flameproof

 Features

1. Customized modular, plug & play design
2. High performance
3. Low maintenance
4. Small footprint
5. Option of automation available
6. Safe operation in hazardous areas
7. Easy availability of spares

 Application Areas

1. Oily Water Treatment
2. Oil & Grease Removal
3. Coolant Recovery Systems
4. Pre-treatment Solutions

Disclaimer: Product prices are subject to change based on the specifications provided in the inquiry.

Product Details:

Coalescer separators are deployed to separate small droplets of free-floating oil from effluent water. Small droplets which cannot be separated by other conventional separation methods can be intercepted by coalescer separators. Coalescer is a superior separation technology that forces two tiny droplets to ‘coalesce’ to form a giant droplet, producing excellent oil and water separation. A coalescer is an efficient oil-water separator incorporated with coalescing material that removes up to 95% floating oil from the water. The oleophilic coalescer filter traps oil particles down to 20 microns. The free-floating oil is skimmed using a suitable skimmer.

Specifications

1. Flow Rate : 5 m3/h to 600 m3/h
2. MOC of Coalescer Tank : RCC/ MSEP/ MSFRP/ SS304/ SS316
3. Coalescer MOC : Oleophilic
4. Oil Content at Outlet : < 10 ppm
5. Oily Water Feed Pump: Low shear pump

 Features

1. Customized design
2. Automated system
3. Easy to install
4. Safe operation in hazardous areas
5. Low maintenance
6. Value for money
7. Easy availability of spares

 Application Areas

1. Oily Water Treatment
2. Oil & Grease Removal
3. Coolant Recovery Systems
4. Pre-treatment Solutions

Disclaimer: Product prices are subject to change based on the specifications provided in the inquiry.

Product Details:

CPI (corrugated plate interceptor) separators are used predominantly to separate free oil from wastewater/effluent. CPI unit is deployed at the primary stage of wastewater treatment wherein plate packs are used as the main separation device. The plate packs are designed with specific spacing and alignment to enable solids to settle and fall to the bottom while allowing oil drops to rise and coalesce. A CPI is also equipped with a secondary coalescer screen. This oleophilic coalescer traps oil particles down to 20 microns. Small particles coalesce into large globules and rise to the surface. Oil is skimmed using a suitable skimmer. Sludge at the bottom is removed by either gravity force or by a sludge removal pump.

Specifications

1. Flow Rate: 5 m3/h to 600 m3/h
2. MOC of CPI Tank: RCC/ MSEP/ MSFRP/ SS304/ SS316
3. Corrugated Plate Pack: Oleophilic
4. Secondary Coalescer: Oleophilic
5. Oil Content at Outlet: < 10 ppm
6. Oily Water Feed Pump: Low shear pump
7. Sludge removal pump: Screw pump

 Features

1. Customized design
2. Automated system
3. Easy to install
4. Safe operation in hazardous areas
5. Low maintenance
6. Value for money
7. Easy availability of spares

 Application Areas

1. Oily Water Treatment
2. Oil & Grease Removal
3. Coolant Recovery Systems
4. Pre-treatment Solutions

Disclaimer: Product prices are subject to change based on the specifications provided in the inquiry.

Product Details:

API oil water separator is a gravity-based separation system. It is designed as per API 421using Stokes’s Law. The specific gravity difference leads to the settlement of heavier solids at the bottom of the separator. Oil rises to form the top layer; heavy suspended particles from the bottom layer and the middle layer are formed by water. The top oil layer is skimmed off using a chain scraper system, slotted pipe skimmer, or a rotary skimmer. The bottom sediment layer is removed by chain and scraper arrangement (or similar device). Dimensions of API pits are specifically designed to ensure oil molecules reach the top surface of fluid before reaching the end of the pit.

Specifications

1. Flow Rate: 5 m3/h to 7500 m3/h
2. MOC of API Tank :RCC/ MSEP
3. MOC of Skimmer Belt : SS304/ SS316/ MSEP
4. Capacity of Belt Skimmer : 10 LPH to 500 LPH
5. MOC of Chain Scraper :SS304/ SS316/ Delrin/ UHMWPE/ MSEP

 Features

1. Customized design
2. Available in a range of capacities
3. Handles diverse viscosity oils
4. Easy to install and operate
5. Low maintenance cost
6. Safe operation in hazardous areas
7. Easy availability of spares

 Application Areas

1. Oil & Grease Removal
2. Oily Water Treatment
3. Coolant Recovery Systems
4. Pre-treatment Solutions

Disclaimer: Product prices are subject to change based on the specifications provided in the inquiry.