Sluice Gates

Product Details:

Open channel gate is used to control flow and isolation of fluids associated with water, waste water, sewage treatment plants, power generation, irrigation schemes and process plants. The modern Open channel gate is designed to cater for a wide variety of duties from low seating to high off-seating heads. Sizes range from 150mm to 3000 mm. It can be made in Rectangular or Square section. Operation of the Open channel gate can be from simple direct operation by hand wheel to complex control systems for electrical, pneumatic or hydraulic actuation. It is available in both flush bottom and conventional bottom configurations.

 Specifications

1. Size : 150 mm to 3000mm
2. Shapes : Square/ Rectangular
3. MOC : CI/ SS/ CS/ AL
4. Sealing : 3 sides
5. Actuation : Manual, Motorized, Hydraulic, Pneumatic
6. Design standards : IS 3042.1965/ IS 13349.1992/ A WW A C513 

 Features

1. Customized design
2. Manual or automatic operation
3. Flush / conventional bottom closure
4. Easy to install
5. Low maintenance
6. Safe operation in hazardous areas
7. Easy availability of spares

 Application Areas

1. Oily Water Treatment
2. SBR Plants
3. MBR Plants
4. Pre-treatment Solutions
5. Post-treatment Solutions

Product Details:

Sluice gate, also known as penstock or slide gate, is used for flow control and isolation of fluids associated with water, waste water, sewage treatment plants, power generation, irrigation schemes and process plants. The modern Sluice gate is designed to cater for a wide variety of duties from low seating to high off-seating heads. Sizes range from 150mm to 2000 mm. It can be made in any Circular, Rectangular or Square section. Selection of the correct Sluice gate to suit the duty is important to satisfy the design criteria and provide the most cost effective solution. Operation of the Sluice gate can be from simple direct operation by hand wheel to complex control systems for electrical, pneumatic or hydraulic actuation.

Specifications

1. Size: 150 mm to 2000 mm
2. Shape: Square/ Rectangular/ Circular
3. MOC: CI/ SS/ CS/ Al
4. Sealing: 3 Sides or 4 Sides
5. Actuation: Manual/ Motorized/ Hydraulic/ Pneumatic
6. Design Standards: IS 3042. 1965/ IS 13349.1992/ AWWA C513

 Features

1. Customized design
2. Manual or automatic operation
3. Flush / conventional bottom closure
4. Easy to install
5. Low maintenance
6. Safe operation in hazardous areas
7. Easy availability of spares

 Application Areas

1. Oily Water Treatment
2. SBR Plants
3. MBR Plants
4. Pre-treatment Solutions
5. Post-treatment Solutions

Product Details:

Weir gate is used to control and regulate of fluids associated with water, waste water, sewage treatment plants, power generation, irrigation schemes and process plants. Sizes range from 150mm to 2000mm. It can be made in Circular, Rectangular or Square section. Selection of the correct Weir gate to suit the duty is important to satisfy the design criteria and provide the most cost effective solution. Operation of the Weir gate can be from simple direct operation by hand wheel to complex control systems for electrical, pneumatic or hydraulic actuation.

 Specifications

1. Size : 150 mm to 2000mm
2. Shapes : Square/ Rectangular/ Circular
3. MOC : CI/ SS/ CS/ Al
4. Sealing : 3 sides and 4 sides
5. Actuation : Manual, Motorized, Hydraulic, Pneumatic
6. Design standards : IS 3042.1965/ IS 13349.1992/ A WW A C513

 Features

1. Customized design
2. Manual or automatic operation
3. Flush / conventional bottom closure
4. Easy to install
5. Low maintenance
6. Safe operation in hazardous areas
7. Easy availability of spares

 Application Areas

1. Oily Water Treatment
2. SBR Plants
3. MBR plants
4. Pre-treatment solutions
5. Post-treatment Solutions